Roller Derby Gear

187 Killer elbow pads are the ideal choice for skating and other action sports. Designed to fit properly, the slim profile does not compromise safety or protection. Experience the preferred option of athletes worldwide.

FEATURES
Contoured form-fitting design cradles elbow
Superior foam system absorbs hard impacts
Streamline shape and design increases mobility
Seamless interior finish provides ultimate comfort
Ballistic nylon with industrial-weight stitching ensures durability

187 Killer junior Knee, Elbow & Wrist 6 pack safety combo kit is the industry best for safety and protection. Design and craftsmanship proven in our Pro Series is used to optimize the fit, comfort, and durability of this junior set. 187 Killer Pads® is the brand trusted by the top skaters in the world.

FEATURES

Contoured form-fitting design cradles knees, elbows, and wrists
Superior foam system absorbs hard impacts
Streamline shape and design increases mobility
Seamless interior finish provides ultimate comfort
Ballistic nylon with industrial-weight stitching ensures durability
Size specific caps provide better protection and minimize bulk
Fits most children ages 3-6, weighing 30-50 pounds.

187 Killer knee gasket pads are typically worn under kneepads to provide additional padding and protection. Also may be worn on its own for activities in which extra support is desired. These are not meant to be a substitute for knee pads.

FEATURES

Curved ergonomic design
Thick padding surrounds the patella
Two layers of neoprene encase super-absorbent EVA foam
Ventilated mesh sewn in for breathability on back of knee
Non-irritating side seams for comfort
Top and bottom stitching for durability

187 Killer wrist guards are the optimum solution for wrist protection. Its design encases the wrist to provide safety from certain injuries related to skating and other action sports.

FEATURES

Angled design conforms to hand for excellent fit
Reinforced thumb hole and palm increase longevity
Ballistic nylon with industrial-weight stitching ensures durability
Padded interior provides increased comfort
Extra thick splint gives concentrated protection at base of hand where most hard impacts occur

187 Killer Pro Derby Pads bring years of roller derby experience from the rink to your knee. Through the input of top skaters, product features have been tested and perfected.

Experience the difference.

FEATURES

Designed Specifically for Roller Derby
– Low profile and less bulk with high level protection
187 Killer Pads® Lock-In™ Core System
– Removable foam allows for easy washing
– Interlocking straps link foam to center of pad casing
V-22™ Dual Density Foam
– Specially formulated to provide the perfect combination of cushion and protection for multiple hard impacts
Rapid F L E X™ Hinge
– Allows pad to respond freely to full range of motion; straighten or bend leg with little or no resistance
Fusion Groove™ Channel
– Maintains foam connection to skater’s leg and helps eliminate pad slip downs
187 Killer Pads® Lock-In™ Cap System
– Secures and aligns removable cap in correct position
Proven 187 Killer Pads® Design Elements
– Light-weight fast drying interior lining
– Seamless interior finish for ultimate comfort
– Ballistic nylon with industrial-weight stitching ensures durability
– Three-panel construction for reliable performance
– Open back design for excellent fit and quick on & off

187 Killer Pro Knee Pads are the ultimate in knee pad protection. It is the preferred choice for environments where heavy protection is a must. Providing unmatched safety through proven technologies and superior materials, the Pro Knee is the trusted choice of professional skaters and top athletes worldwide.

FEATURES

V-22™ Dual Density Foam
– Specially formulated to provide the perfect combination of cushion and protection for multiple hard impacts
187 Killer Pads® Lock-In™ Cap System
– Secures and aligns removable cap in correct position
Proven 187 Killer Pads® Design Elements
– Light-weight fast drying interior lining
– Seamless interior finish for ultimate comfort
– Ballistic nylon with industrial-weight stitching ensures durability
– Three-panel construction for reliable performance
– Open back design for excellent fit and quick on & off

187 Killer Pro Skate Helmet FEATURES

Integrated Headband™
– Improved sweat absorption, removable & washable
Sure-Fit Foam Liner™
– Foam inserts surround head for better fit & performance
No-Pinch Buckle™
– Light-weight construction, easy release

Attention:
This product has not been tested under ASTM, CPSC, or ANSI safety standards.

Atom Armor Adult Elite 2.0 Elbow Pads

Elite Elbow pads are Kevlar-covered to protect yourself and others in contact, also protects the skating surface. Heavy-duty, perforated neoprene wraps the protected area, providing maximum mobility, comfort and security.

*measure 4″ up from the crease of your elbow
XS (extra small) = 8″-10″ bicep circumference
SM (small) = 10″-11″ bicep circumference
MD (medium) = 11″-12″ bicep circumference
LG (large) = 12″-13″ bicep circumference
XL (extra large) = 13″+ bicep circumference

Atom Armor Adult Elite 2.0 Knee Pads

Atom Elite is the sleekest protective gear available while still providing maximum mobility with protection. High-density EVA foam pads strategically placed on both the inside and outside of the knees to protect knee ligaments and tendons.

SIZING
*measure 4″ up from the top of your patella (knee cap)
XS (extra small) = 10″-12″ circumference
SM (small) = 12″-16″ circumference
MD (medium) = 16″-20″ circumference
LG (large) = 20″-23″ circumference
XL (extra large) = 23″+ circumference

Atom Armor Adult Wrist Guards (Pair)
Features contoured palm protection for ultimate fit & comfort. High-density foam to absorb impact. Lightweight and breathable. Adjustable Velcro straps. Hand wash and dry.

SIZING
*measure 1″ down from middle knuckle and across from pointer knuckle to pinky knuckle
*measure wrist from 1/4″ past wrist bone
SM (small) = 2.5″-3″ palm width | 5″-6″ wrist circumference
MD (medium) = 3″-4″ palm width | 6″-6.5″ wrist circumference
LG (large) = 4″-4.5″ palm width | 7″-7.5″ wrist circumference
XL (extra large) = 4.5″+ palm width | 8″-8.5″ wrist circumference

Atom D-Rod Wheels (Set of 4)

The last time you got smashed in a bout, it was by this wheel. D-Rods top the industry as the #1 derby wheel for sport tile flooring. The 95A hardness on the “Hybrid Hollow Core” allows for a perfect balance in stiffness and roll, with a weight that’s 25% lighter than aluminum wheels.

62mm x 44mm x 95a

Purpose
Derby
Surface
Indoor and
Coated Surfaces

Atom Wheels Dubz 2.0 – now in a 95A! This wheel is perfect for those skaters who want all the performance found in Dubz 97A but with a bit more grip.

62mm x 44mm x 95a

Purpose
Speed/Derby
Surface
Indoor/Coated
Cement Surfaces
Sport Court

Atom Juke Alloy Wheels (Set of 4)

Craving some Juke 2.0 Alloys with maximum roll? We’ve got you covered! Perfect for flat track derby, you’ll start, stop, manuever and ‘juke’ like never before! All this in a bright green urethane and Hybrid Alloy core. This wheel has got it all!

59mm x 38mm x 93a or 95a

93a Purpose
Derby
Surface
Polished Concrete
Semi-maintained wood
Sport Court

95a Purpose
Derby
Surface
Grippy Wood Floor
Grippy Sport Court
Concrete w/ Plastic

Atom Lowboy Slim Wheels (Set of 4)

Lowboy Slim gives you the same great performance as our standard Lowboy, but in a slim profile. This wheel provides balanced behavior for precision speed and cornering.

62mm x 38mm x 95a

Purpose
Derby
Surface
Indoor/Coated
Cement Surfaces
Sport Court

Atom Poison Slim 59mm Wheels (Set of 4)

Say hello to Poison SLIM! This wheel has all of the same amazing characteristics of the original Poison, providing the ulitmate grip and roll you would expect from Atom Wheels.

59mm x 38mm x 84a

Purpose
Derby
Surface
Indoor/Outdoor &
Slick Surfaces

Atom Pulse Wheels (Set of 4)
Whether you’re a derby skater looking for some road work, a beach skater on the boardwalk or someone just looking for some great outdoor recreation, Atom’s Pulse is your wheel!

65mm x 37mm x 78a

Purpose
Outdoor/Recreational
Surface
Sidewalk/Boardwalk

Atom Snap Wheels (Set of 4)

Snap utilizes the same urethane as the highly-popular Poison wheel but provides even more roll! Ideal for multiple skating surfaces, Snap is an ultra-durable wheel that maximizes grip and roll at an affordable price!

62mm x 44m x 91a

Purpose
Derby/Training
Surface
Uncoated Surfaces
Cement Surfaces
Sport Court

Atom Super G Wheels (Set of 4)

MIND BOGGLING explains this wheel. Super G features a full urethane front supported with a large back mini-core.  Looking for something that has more grip than a Stinger but not as soft as a Poison?, this is your wheel!

59mm x 38mm x 88a (blue) and 91a (red)

88a & 91a Purpose
Derby
Surface
Wood
Sport Court
Polished Concrete

Atom Trak Atak Wheels (Set of 4)

Like the feel of the 59mm but want the grip of the 62mm? Well look no further! With our new smaller solid core it allows us to pour more urethane, in turn providing the same grip you’d get with a 62mm wheel. It’s considered a slim but has a lip on it like our wide wheels, further improving the grip.

59mm x 38mm x 93a (blue), 95a (red), 97a (white)

93a, 95a, 97a Purpose
Derby
Surface
Sport Court
Hardwood
Painted Concrete

Bionic ABEC-7 bearings are lubricated with speed oil and require no break-in period. Delrin cage reinforced.

Bionic Bushings feature high-rebound elastomer for long life and superior response.

Available in: blue-soft | red-medium | yellow-hard

Bionic Super Stoppers are appropriate for today’s high-performance roller sports and the demanding skater. Perfect for all skating surfaces, Bionic Super Stoppers have a large footprint, (45mm), for maximizing grip, stability and agility. (2 Pack)

Available in 20mm & 30mm stem length

Bionic SWISS High-performance skate bearings requiring no break-in period. Feature Titanium ball bearings, Delrin cage 20% glass reinforced with extra deep grooves for increased longevity and low maintenance.

Bionic SWISS feature titanium ball bearings and utilize shields to protect the internal parts of the bearing against contamination by dust and liquid. The shields help contain the lubricant in the bearing, are fixed to the outer ring and have a non-rubbing seal to the
inner ring.

Black Panther ABEC 3’s are smooth. These bearings consist of long lasting polished ball bearings and races, lubricated with genuine Teflon oil, speed washers, and Derlin core for strength and resistance. Removable rubber coated shield makes for easy cleaning and water resistance.

includes free bearing spacers.

Black Panther ABEC 5’s are smooth. A step above both the ABEC 3. These bearings consist of long lasting polished ball bearings and races, lubricated with genuine Teflon oil, speed washers, and Derlin core for strength and resistance. Removable rubber coated shield makes for easy cleaning and water resistance.

includes free bearing spacers.

Black Panther ABEC 7’s are smooth. A step above both the ABEC 3 and 5. These bearings consist of long lasting polished ball bearings and races, lubricated with genuine Teflon oil, speed washers, and Derlin core for strength and resistance. Removable rubber coated shield makes for easy cleaning and water resistance.

includes free bearing spacers.

Black Panther Ceramic Bearings consist of long lasting polished ball bearings and races, lubricated with genuine Teflon oil, speed washers, and Derlin core for strength and resistance. Removable rubber coated shield makes for easy cleaning and water resistance.

includes free bearing spacers. Black rubber shields with gold lining.

Bones Bearings Cleaner

Finally, a bearing cleaning unit brought to you by the bearing company by which all quality standards are measured.
Features

Made of fluorinated high density polyethylene
7 spacers for a good flush in less time
Cleans up to 8 bearings at a time
Cleans all skate bearings
Bearings and solvents not included

Contents

A detailed instruction sheet will also be included with the unit to insure easy and proper use.

Bones Bearings Pusher / Puller Tool

Finally, a bearing tool brought to you by the bearing company by which all quality standards are measured.

The story of Ceramic Super REDS™ is simple. Take the superior steels used in our Super REDS™ and swap the steel balls for grade 5, silicone nitrade, hot iso-statically pressed ceramic balls and you have Bones Ceramic Super REDS™.

Bones Ceramic Super REDS™ are lighter and provide faster acceleration because the balls weigh much less. They create less friction and are thus faster than Super REDS™, with or without lubricant! When you get dirt into your Ceramic Super REDS™, the ceramic balls will help to re-polish the steel races flat again, providing a self-healing benefit because ceramic balls are so much harder than steel. Finally, ceramic balls will not rust, further lengthening their life. Ceramic Super REDS™ use a bone colored shield with laser-engraved outer races for identification.

Contents

Set of 8 bearings
Instructions
Sticker

Epic Bones sunglasses, CHEAP & Classy.

Bones® REDS® are manufactured in China to our Bones Skate Rated® specifications in a manufacturing facility dedicated to producing the highest quality skate bearings in China. They are inspected twice before being shipped to skaters and offer the greatest combination of performance, durability and low cost in the industry. Because they offer near Bones® Swiss performance at a fraction of the cost, they have become the best selling bearing brand in the U.S.A.

Features
Single, non-contact, removable rubber shield for easy cleaning and less friction.
High speed nylon ball retainer for greater strength and speed.
Pre-lubricated with Speed Cream® racing lubricant.
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.

Contents
Set of 16 bearings
Instructions
Sticker

Sizes: Standard 608 (8mm) or the smaller 627 (7mm)

Bones® Speed Cream® is a high temperature, low viscosity synthetic skate lubricant specially formulated by Bones® to reduce friction, and provide a durable micro film of lubricant to protect against corrosion. We have found this lubricant to be superior to Teflon® based lubricants in skate environments. Speed Cream® makes your bearings faster and is very long lasting.

Super REDS™ are designed from the ground up to be the best bearing on the market at this price point. What Super REDS™ are not is a REDS™ bearing with just better super finishing (surface polishing). Super REDS™ are a superior quality bearing, using higher quality steel races, better quality and grade balls, and a superior surface finish. The result is a bearing that is as fast as REDS™ but quieter, smoother, and longer lasting. Super REDS™ use a black shield and laser engraving to differentiate themselves from original REDS™.

Contents

Set of 8 bearings
Instructions
Sticker

Legendary Original Bones® Swiss Bearings are the optimum combination of Bones Skate Rated™ design and Swiss precision manufacturing creating the standard by which all other bearings are measured. For more than 24 years preferred by the world’s top professional skaters. Proven, professional competition-grade speed and durability make Bones Swiss normally last several times as long as ordinary ABEC rated bearings.
Features

Single, removable, non-contact rubber shield allows easy cleaning and low friction.
High speed nylon ball retainer provides added strength and speed.
Pre-lubricated with Speed Cream® racing lubricant.
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.
Best selling high end skate bearing in the U.S.A.

Contents

Set of 16 bearings
4 bearing spacers
Instructions
Sticker

This unique design features six larger diameter balls instead of the seven balls used in most 608 bearings. The advantage of this design is higher speed, faster acceleration, greater strength and durability.

Contents

Set of 8 bearings
Instructions
Sticker

Bones Swiss Ceramics are in a class by themselves. If you want the best there is, this is it. The Cerbec® Ceramic balls are much lighter, harder, stronger, and longer lasting than the finest steel balls.

Contents

Set of 8 bearings
Instructions
Sticker

This new bearing is similar to the original Bones® Swiss bearing, but with a redesigned inner race and two labyrinth seals to keep dirt out even better than before. Bones Labyrinth shields are non-contact, so that they do not increase friction, only the distance dirt particles must travel to get past the shields. The only difference you will notice is that the labyrinth shield Bones will last several times longer than the original Bones Swiss between cleanings. This significant increase in service life comes at a very small increase in retail cost, so the value is greatly increased.

Contents

Set of 8 bearings
Instructions
Sticker

Bullet Skate Elbow Pads features:

Constructed from tough Cordura
Comfortable neoprene backing
Durable plastic caps
Ideal for beginner to intermediate riders
Super durable

Destroyer AM Series Knee Pads

SPECIFICATIONS
– High impact foam for comfort and protection
– Custom colored neoprene back with open design for exceptional fit
– Anatomically constructed for secure positioning
– Custom molded and custom colored polycarbonate caps
– Custom colored ballistic nylon shells
– Fit-Control strap technology

SIZES
S: 12-14″ M: 14-15 1/2″ L: 15 1/2″ – 17 1/2″ XL:17 1/2″ – 19″
Distances around leg, Measured 2″ above knee

Destroyer Pro Series Knee Pads

SPECIFICATIONS
– High impact dual density foam for comfort and protection
– Custom perforated neoprene design with open design for exceptional fit
– Anatomically constructed for secure positioning
– Custom molded and custom colored nylon caps
– Custom colored ballistic nylon shells
– Fit-Control strap technology

SIZES
S: 12-14″ M: 14-15 1/2″ L: 15 1/2″ – 17 1/2″ XL:17 1/2″ – 19″
Distances around leg, Measured 2″ above knee

FKD Bearing Press makes pressing bearings a snap. Bench mount, wall mount or portable.

Ideal for teams, coaches, shops, garages or mom’s basement etc.

Independent Bearing Press; the professional way to press bearings. Can be Wall mounted, Bench Mounted or portable.

Great for shops, teams, garages, coaches, etc. “INDEPENDENT – BUILT TO LAST”

The perfect all-in-one tool from Independent is the CNB Tool. A pocket tool, it’s small enough to fit in your pocket and tough enough to last a while. Accept no substitutes. The CNB tool comes your way with a solid black pouch. Independent logo on product. BUILT TO LAST

Package includes:

* CNB Pocket Tool with 3/8″, 1/2″, and 9/16″ wrenches
* Allen Key/Phillips Driver
* Canvas sheath

The Industrial Skateboard helmet is a great helmet at an excellent value.

Dual density EVA/foam liner
Multiple vent holes
Adjustable chin strap secured by heavy duty rivets
Not certified for bike use
Classic skate helmet shape

Colors
Flat Black
Flat Army Green
Flat Blue
Flat Burnt Orange
Flat Grey
Flat White
Neon Green
Neon Orange
Neon Pink

Sizes: S, M, L

16 Pack of Japanese Bulk Bearings – Good quality, low price

Live To Surf – Water Bottle

Comes in Silver and Yellow and lime green

one for $10 or two for $15

Live To Surf sexy booty shorts – Seen worn by the Black Pearls Roller Derby Girls

’84 skulls logo. Live To Surf – Since 1984

Luigino Atom Quad Inline Sports backpack now with a ventilated outer pocket for perfect for storing skates and clothes post workout… No more sweaty smell!

(Works with Quad or Inline Skates)

Traveling to practice and events is a whole lot easier with a Luigino/Atom Trolley Bag! Features include: Retractable handle, Detachable ‘mini-bag’ adds flexibility when fitting in overhead compartments and durable wheels. The perfect travel companion.

Designed from a female foot-last/shape, Luigino Vertigo is an all new quad boot concept. As always, Nistevo approaches new product design with the idea of first and foremost enhancing skater performance. Our flagship Vertigo Q-6 and Q-4 boots represent an entirely new concept while our Vertigo F-1 shares some of the same technology while maintaining a more traditional look and feel.

Features:
• AquaTech and Leather board counters • Pro Evolution Foot Bed (e-Soles)
• BFT (Barefoot Technology) • Poron Padding • Top-Grain Leather Soles (Stitched)
• Microfiber uppers & lining • Ankle Powerstrap
• Sizes: 4 thru 12 (+1/2 sizes)

Luigino Vertigo Q-4 Roller Boot
Designed from a female foot-last/shape, Luigino Vertigo is an all new quad boot concept. As always, Nistevo approaches new product design with the idea of first and foremost enhancing skater performance. Our flagship Vertigo Q-6 and Q-4 boots represent an entirely new concept while our Vertigo F-1 shares some of the same technology while maintaining a more traditional look and feel.

Features:
• AquaTech and Leather board counters • Pro Evolution Foot Bed (e-Soles)
• BFT (Barefoot Technology) • Poron Padding • Top-Grain Leather Soles (Stitched)
• ProBack • Microfiber uppers & lining • Ankle Powerstrap
• Sizes: 4 thru 12 (+1/2 sizes)

Luigino Pilot Eagle Plus Features:

• 16 Degree Truck Angle
• Adjustable Truck
• Forged 7075 Trucks
• Base-Zytel
• Adjustable Pivot
• Bionic Bushings Urethane
• Steel King Pin
• Micro-Adjustable Lock Nut/Washer
• 8mm Axles • Bionic Super Stopper

It has only taken 30 years to make technology this much fun!

Pilot F-16 – The Ultimate Quad Plate System
Simply put, Pilot F-16 is technology made simple. The plates are easy to change, upgrade, and adjust. Just select the right plate that fits your needs and budget; when it’s time to upgrade, no worries! Change from Zytel to Alloy without drilling new holes, or easily upgrade all your trucks from standard one-piece to two-piece precision pivot pin adjustment plates, all without the hassles of another truck angle or plate positioning. Pilot does it all for you!

Sold as a pair.

Luigino Pilot Eagle Features:

• 16 Degree Truck Angle
• One-Piece Cast Truck
• Base-Zytel
• 8mm Axles
• Steel King Pin
• Micro-Adjustable Lock Nut/Washer
• Bionic Bushings Urethane
• Bionic Super Stopper

It has only taken 30 years to make technology this much fun!

Pilot F-16 – The Ultimate Quad Plate System
Simply put, Pilot F-16 is technology made simple. The plates are easy to change, upgrade, and adjust. Just select the right plate that fits your needs and budget; when it’s time to upgrade, no worries! Change from Zytel to Alloy without drilling new holes, or easily upgrade all your trucks from standard one-piece to two-piece precision pivot pin adjustment plates, all without the hassles of another truck angle or plate positioning. Pilot does it all for you!

Sold as a pair.

Luigino Pilot Falcon Plus Features:

• 16 Degree Truck Angle
• Forged 7075 Trucks
• Adjustable Pivot
• Base-CNC 6065 T6 Aircraft Aluminum
• Alloy King Pin
• Micro-Adjustable Lock Nut/Washer
• 8mm Axles • Bionic Bushings Urethane
• Bionic Super Stopper

It has only taken 30 years to make technology this much fun!

Pilot F-16 – The Ultimate Quad Plate System
Simply put, Pilot F-16 is technology made simple. The plates are easy to change, upgrade, and adjust. Just select the right plate that fits your needs and budget; when it’s time to upgrade, no worries! Change from Zytel to Alloy without drilling new holes, or easily upgrade all your trucks from standard one-piece to two-piece precision pivot pin adjustment plates, all without the hassles of another truck angle or plate positioning. Pilot does it all for you!

Sold as a pair.

Luigino Pilot Falcon Features:

• 16 Degree Truck Angle
• One-Piece Cast Truck
• Adjustable Pivot
• Base-CNC 6065 T6 Aircraft Aluminum
• Alloy King Pin
• Micro-Adjustable Lock Nut/Washer
• 8mm Axles
• Bionic Bushings Urethane
• Bionic Super Stopper

It has only taken 30 years to make technology this much fun!

Pilot F-16 – The Ultimate Quad Plate System
Simply put, Pilot F-16 is technology made simple. The plates are easy to change, upgrade, and adjust. Just select the right plate that fits your needs and budget; when it’s time to upgrade, no worries! Change from Zytel to Alloy without drilling new holes, or easily upgrade all your trucks from standard one-piece to two-piece precision pivot pin adjustment plates, all without the hassles of another truck angle or plate positioning. Pilot does it all for you!

Sold as a pair.

PowerDyne Skate Tool, an ergonomic non slip grip tool offering 3 tools in one , designed with a 9/16″ & 1/2″ socket ends & a 15/16″ open ended spanner. A universal tool that should cover most of your Roller Skate maintenance requirements.

Roller Bones Day of the Dead Wheels 62mm 92a

(Includes set of 8 wheels)

Roller Bones Day of the Dead Wheels 62mm 94a

(Includes set of 8 wheels)

Roller Bones Rose Wheels 62mm 80a

(Includes set of 8 wheels)

Roller Bones Snake Roller Wheels 62mm 96a

(Includes set of 8 wheels)

Roller Bones sunglasses are bad ass and won’t break the bank so you don’t have to worry about breaking them.

Roller Bones thigh high socks – SEXY Derby Girls

85% Cotton / 10% Poly / 3% Nylon / 2% Elastic

RollerBones Premium speed/ derby wheel with an extruded aluminum hub. Superior roll and speed. Best derby wheel on the planet.

62x37mm & Choose how hard you like it.

(Includes set of 8 wheels)

The S-One Kid helmet is a scaled down version of the Lifer helmet. It is a smaller mold with shorter straps. The Kid helmet is great for little rippers or women with smaller heads. We include two extra sets of sizing pads to ensure a perfect customized fit. We recommend that you measure your head by following the sizing instructions on the link above.

The S-ONE Kid Helmet is a professional grade skate/bike helmet featuring a high-impact EPS Fusion Foam Liner for maximum protection. This helmet has been tested to rigorous safety standards and is CPSC and ASTM certified for skateboard, bike and roller skating use.

Features:
Designed to protect against multiple small impacts and one big impact.
High Impact (Hard) EPS Fusion Inner Foam.
5 x Safer than a Soft Foam Helmet.
Designed To Fit & Look Like a Soft Foam Helmet.
Smaller Mold to Fit Smaller Heads.
Lead and Phthalate Free.
Lightweight Construction.

Certification:
CPSC, CE EN-1078, ASTM 1492

Sizing
XS: (18.5″) Also Come With Small and Medium Sizing Pads /
S: (19″) Also Come With Medium and XS Sizing Pads /
M: (19.5″) Also Come With Small and Large Sizing Pads /
L: (20″) Also Come With Medium and X-Large Sizing Pads /
XL: (20.5″) Also Come With Medium and Large Sizing Pads /

The S-ONE Lifer Helmet is designed to fit low on the head like a traditional soft foam skateboard helmet. This helmet is a break through design combining the added safety of a CPSC and ASTM certified helmet with the comfort and fit of a soft foam helmet. The Lifer has an old school look with traditional circular air vents.

The S-ONE Lifer Helmet is a professional grade helmet featuring a high-impact EPS Fusion inner foam mold for maximum protection. This helmet is CPSC certified for skateboard, roller skate and bike usage. The Lifer also meets the ASTM F-1492 certification (multiple impact test for skateboarding and roller skating). The Lifer comes with two extra sets of sizing pads to insure a perfect customized fit.

Features:
Designed to protect against multiple small impacts and one big impact.
High Impact (Hard) EPS Fusion Foam Mold.
Fits low on the Dome.
5 x Safer than a Soft Foam Helmet.
Lightweight Construction.
Lead and Phthalate Free

Certification:
CPSC, CE EN-1078, ASTM 1492

Sizing
S: 21″ (HAT SIZE: 6 5/8)
M: 21.5″ (HAT SIZE: 6 7/8)
L: 22″ (HAT SIZE: 7)
XL: 22.5″ (HAT SIZE: 7 1/4)

The S-ONE Premium helmet is a Non-Certified (minimal impact) helmet with soft foam inner padding. The soft foam inner padding is wrapped with our DLX terry liner. The DLX helmet liner is a soft sweatband material that is sewn around the helmet padding. The DLX liner soaks up sweat and keeps your head cool and helps the inner pads last longer. Also, the DLX liner is easily washable so you can rinse it out after a heavy session.

Features:
Absorbo (soft) inner foam padding
DLX sweat absorbing terry cloth liner
Lead and Phthalate Free

Warning: The S-One Premium Helmet is not CPSC Certified. CPSC Certified helmets are up to 5x more protective than the non-certified helmets.

Certification:
This helmet is NOT CPSC Certified so it cannot be shipped to customers in California.
This helmet is NOT CPSC or ASTM Certified so it is not certified for skate or bike use.

Sizing
S: 21″ (HAT SIZE: 6 5/8)
M: 21.5″ (HAT SIZE: 6 7/8)
L: 22″ (HAT SIZE: 7)
XL: 22.5″ (HAT SIZE: 7 1/4)

Shortys Qik “Quickies” 100% Steel Ball Street Bearings w/Spacers / Developed with 3 objectives in mind: strength, Quality and Durability / Steel Outter Race / Steel Balls / Steel Cage / Steel Shield / Steel Inner Race / Heavy Duty Street Bearings / Removable Shield Bearings allow you to pop the shields off and clean them. Keep em rollin’ tough.

Smith Scabs Elbow pads are top of the line! Built for extreme street/ramp riding. The articulated design forms to the elbow making it a flexible and contoured non sliding fit. The special foam system provides ultimate protection on impact areas and longevity of the pads. The wide, adjustable fitting elastic strap and two adjustable neoprene/velcro closures ensure great fit and comfort. Designed to fit and stay put.

Available in Black, Psycho, and Leopard Print

Overall length Top opening
S/M 23 cm 28-36 cm
L/XL 25 cm 33-41 cm

Smith Scabs Elite Knee pads are top of the line! Built for extreme street/ramp riding. The articulated design forms to the knee making it a flexible and contoured non sliding fit. The special foam system provides ultimate protection on impact areas and longevity of the pads. The wide, adjustable fitting elastic strap and two adjustable neoprene/velcro closures ensure great fit and comfort. Designed to fit and stay put.

Available in Black, Psycho, and Leopard Print

Overall length Top opening Bottom opening
S/M 27cm 27-36 cm 13 cm
L/XL 28cm 32-42 cm 16-20 cm

Smith Scabs Knee Gasket Horseshoe Pads are made of neoprene with additional impact absorbing knee padding. These knee gaskets specialize in provided support and comfort to people with weak or injured knees, and are not made to protect against hitting or scraping your knee. They are made of elastic neoprene material which wraps around all sides of the knee in order to provide maximum support. The knee gaskets provide support areas of the knees which other skate knee pads cannot provide. Also, they can be attached and worn under your knee pads for additional extreme protection.

SIZING
Top of knee Bottom of knee
S : 33-41 cm 28-36 cm
M : 38-46 cm 31-38 cm
L : 46-53 cm 38-46 cm
XL: 53-61 cm 43-51 cm

The Multi-Function T Tool

Includes 9/16″ wrench for adjusting trucks tightness. * Does not include 11/16″ wrench for adjusting lock nut on dual action plates.
Includes 1/2″ wrench for adjusting wheel nuts
Includes Phillips screwdriver for adjusting toe-stops * note that some roller skates take a flat head for adjusting the toe-stops

Triple Eight is proud to introduce its all new Dual Certified (CPSC Bike & ASTM Skate) Brainsaver helmet w/ EPS Liner. The new Brainsaver boast a streamlined look on the classic Brainsaver shape. But the changes don’t stop there. Construction of the EPS liner was engineered so that it complies with U.S. CPSC Safety Standard for Bike for ages 5 AND ASTM F-1492-08 Safety Standards for skateboarding and trick roller skating. The shape of the inside of the helmet was designed so it fits a variety of heads with a comfortable fit and comes with two set of inserts to adjust for a proper fit. This helmet is ideal helmet for biking, skateboarding, long boarding, inline skating (roller blading), and roller skating
• Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older AND ASTM F-1492-08 Safety Standards for skateboarding and trick roller skating
• Polystyrene Liner
• Triple Eight Customized Logo Rivets
• Ideal for biking, skateboarding, long boarding, inline skating (roller blading), and roller skating
• Sizes – S/M, L/XL (each helmet comes standard with 2 set of inserts to accommodate both sizes)
To ensure a perfect fit, measure the circumference of your head starting in the middle of your forehead and match it with the sizes below.

Size Chart
XS/S 18.9-21.3in (48-54cm)
S/M 21.7-22.8in (55cm-58cm)
L/XL 23.2-24in (59-61cm)

Triple Eight Brainsaver rubber helmet is one of the best multi-impact helmets available. This helmet can be used as necessary protective gear for skateboarding, in-line skating (“rollerblading”), roller derby, and scooters. This helmet is not for bicycle use. At Triple Eight we know that sweating while skateboarding sucks, so our techies here listened to our top riders, went back to the drawing board and developed the patented Sweatsaver™ liner that helps eliminate the smells, the stinging and the eye blurring that occurs from sweat. Our revolutionary liner has moisture-wicking layers that limit sweat drippage, an anti-bacterial treatment to make it virtually stink proof, and a 360° wrap around design so that there is absolutely no liner separation. With our terry cloth construction, you can kiss that itchy head feeling goodbye. Our Sweatsaver™ liner is standard in all rubberized helmets and pro helmets, and is also sold individually in sizes XS – XL.
Product Details:
• Multi-impact Design
• Sweatsaver™ liner comes standard
• Adjustable Straps
• Triple Eight Customized Logo Rivets
• Ideal for skateboarding, in-line skating (“rollerblading”), roller derby, and scooters. Not for bicycle use.
• Sizes – Small, Medium, Large

Brainsaver Rubber Helmet Sizing Chart:
To ensure a perfect fit, measure the circumference of your head starting in the middle of your forehead and match it with the sizes below.
XS 20.10 in – 20.50 in (51-52cm)
S 20.60 in – 21.30 in (52-54cm)
M 21.40 in – 22.00 in (54-56cm)
L 22.10 in – 22.90 in (56-58cm)
XL 23.00 in – 24.00 in (58-60cm)

This helmet does not comply with the U.S. CPSC safety standard for bicycle helmets for persons age 5 years and older.

Hired Hands Wrist guards is one of Triple Eight’s most popular protective gear items, this glove is fully padded with shock absorbing foam layers for maximum shock absorption and designed with top grain leather for style and durability. An EZ pull-on loop helps you slide your hand in, and a thick neoprene straps delivers a perfect fit. These gloves are ideal for skateboarding, inline skating (roller blading), and roller derby use.
Product Details:
• Top and bottom removable / replaceable impact-resistant ABS splints add to the versatility of this glove
• EVA shock absorbing foam layers with double stitching for increased durability
• Thick neoprene support strap ensures a secure fit
• EZ pull on loop
• Ideal for skateboarding, inline skating (roller blading), and roller derby
• Sizes – S, M, L, XL

S 7.5 – 8.0 inches
M 8.0 – 9.0 inches
L 9.0 – 10.0 inches
XL-10.0-11.0 inches

Triple Eight KP Pro knee pads for the athlete that wants to wear the best.

• Specially contoured body for maximum protection and comfort without the bulk
• Heavy duty contoured EVA memory foam
• High-density, impact-resistant cap securely attached with reinforced rivets
• Neoprene butterfly back closure for easy on and off without having to take your shoes on and off
• Top elastic and bottom web adjustable straps
• Ideal for skateboarding and roller derby
• Sizes – S, M, L, XL

Triple Eight KP Pro Knee Pads Sizing
(measure circumference of extended knee)
S 12.5 -14.5 in (32-36cm)
M 14.5 -16 in (36-40cm)
L 16 -17 in (40-44cm)
XL 17 – 19.5 (44-50cm)

Mitchie “Little Tricky” Brusco from Kirkland, Washington is one of the most recognizable young skateboarders in the world. Triple Eight has protected Mitchie ever since he started skating and we are proud to reintroduce a helmet that Mitchie inspired and helped design. The Little Tricky gear has all the same style and superior protection as our adult line, but is fitted for kids and also complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older and ASTM F-1492-08 safety standards for skateboarding and trick roller skating. This helmet is ideal for kids engaging in skateboarding, biking, inline skating (roller blading), and all roller sports. When it comes to progression, Mitchie is on the cutting edge with Little Tricky keeping him protected.

Product details: Dual Certified Youth Helmet
• Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older and ASTM F-1492-08 safety standards for skateboarding and trick roller skating
• Style options include a rubberized or glossy finish
• Adjustable straps
• Ideal for skateboarding, biking, inline skating (roller blading), and all roller sports
• One size fits all – Youth ages 6-11 (Each helmet comes standard with an extra set of fit pads to better customize fit) -fits size 49-52cm or 19.3-20.5 in

Triple Eight Roller Derby Bumsavers (hips & bum pads) designed with the help of derby girls specifically for the bumps and bruises of Roller Derby.
• Lycra body provides a cool and snug fit
• Removable shock absorbing EVA foam pads make them customizable and easy to wash
• Broad tailbone and butt padding to protect your most important assets
• Convenient, small inside pocket for your mouthguard, ID, cash, etc.
• Light and flexible for total overall comfort
• Short leg length
• Sizes – S, M, L, XL

S – Small Waist 26″ – 30″
M – Medium Waist 29″ – “33”
L – Large Waist 32″ – 38″
XL – Extra Large Waist 36″ – 42″

Triple Eight roller derby wrist savers are designed & tested by derby girls, for derby girls, these wristguards come with uncompromising protection so you can get your game on. You asked, we delivered. Triple Eight’s newest wristguard was designed with a wider palm splint and snug fit body to withstand the rigors of derby.

• Extra wide palm splint for greater coverage and energy disbursement
• High-density, impact-resistant, replaceable splints positioned on front and back of wrists for support
• Sweatsaver™ brow-wipe on back of hand
• Terry cloth inside lining for comfort
• Reinforced double-stitching throughout

Sizes: S, M, L

Wristsavers Sizing Guidelines:
To ensure a perfect wrist guard fit, measure hand circumference at the knuckles and match to the sizes listed below:
S 7.5 – 8.0 inches
M 8.0 – 9.0 inches
L 9.0 – 10.0 inches

Triple Eight’s Saver Series; Kneesaver Knee Pads, Elbowsaver Elbow Pads and Wristsaver Wrist Guards, packaged together in a convenient 3-pack. The knee pads and elbow pads are made of high grade durable fabrics, EVA foam padding, and polycarbonate full coverage caps to provide superior protection without restricting movement. The wrist guards offer great support and protection with high density impact-resistant molded ABS splints on front and back of wrists for support. This 3-pack is ideal for inline skating (roller blading), and all roller sports, and a great, convenient way to have all the necessary protective gear.
Product details:
• Includes Wristsavers, Kneesavers, and Elbowsavers
• Ideal for inline skating (roller blading), skateboarding, Roller Derby and all roller sports
• Sizes are as follows:
Junior – Includes Junior size wrist guards, knee pads and elbow pads
Small – Includes adult size small wrist guards, and adult one size fits all knee and elbow pads
Medium – Includes adult size medium wrist guards, and adult one size fits all knee and elbow pads
Large – Includes adult size large wrist guards, and adult one size fits all knee and elbow pads

Wristsavers Sizing Guidelines:
To ensure a perfect wrist guard fit, measure hand circumference at the knuckles and match to the sizes listed below:
Jr 7.0 – 7.5 inches
S 7.5 – 8.0 inches
M 8.0 – 9.0 inches
L 9.0 – 10.0 inches

The Black Widow Bearings ABEC 5 are wicked fast. Titanium made with removable black shields and open shield for easy maintenance. They spin fast. Sold in set of eight. Come in a cool and tiny plastic coffin.